Road Dust Control Chemicals in Canada

Canadian cities can spend billions of dollars each year on infrastructure, but the budget may be insufficient to do all the work required, and the demand to conform to higher safety, environmental, and health protection standards increases. In some cases, there is no funding to pave all gravel roads, lanes and parking lots. This can become a problem in hot, dry weather as the small particles become stirred up by traffic, causing dust. When that is the case, municipalities often turn to dust control products on unpaved roads and paths to minimize their impact on the environment.

Dust control is critical to prevent air-borne particles from contaminating the air. Dust control products help keep dust and small particles on the road to minimize risks associated with poor visibility due to dusty conditions. Dust is not a problem when it rains or when the ground is wet, however, this is not the case when the conditions are dry. Then it becomes important to consider using road dust control chemicals. These chemicals provide lasting results and do not dry out easily, minimizing the need for frequent reapplication.

Resin modified emulsion products are a commonly used road dust control chemical in Canada. Apart from controlling dust, they also strengthen and stabilize the road. Resin modified emulsion products are a good alternative to calcium chloride when environmental sensitivity is a priority. Made from tree resin ingredients, the non-ionic, state-of-the-art emulsion technology has superior bonding strength and environmentally friendly benefits. It can be used near wetlands without risk of contamination. 

High-quality, environmentally friendly road dust control chemicals in Canada should be non-corrosive and biodegradable. Therefore, they do not pose any significant risk to the environment, people, or application equipment. They contain a humectant which draws moisture from the air and aids in minimizing dust, as well as a surfactant to ensure optimum wetting characteristics.